The imperfections in printing an image such as gaps and white strips are sometimes unavoidable. There may be swings in the page output when trimmed or bent. However, there is a way to control it. The technique used that serves as background fillers expanding at the edges of a page are called bleeds. Creating it with the help of Photo editing app avoids printing inadequacies. Follow these simple steps on how to add bleeds in your picture.
What You Will Need?
- Adobe Photoshop Software
- Any desired image file
Step 1 – Begin by opening the Adobe Photoshop program. Select “File” menu and then “Open.”
Step 2 – Choose the image you wish to create bleeds. Click “Open.”
Step 3 – Go to “Image” menu and change the “Canvas size.” Expand the size to where you will put the bleeds. Most likely, the expected bleed allowance is 1/8” or 0.125” for the height and width of the image. The bleeds will automatically display and fill the borders of your graphic image after you click “OK.”
Step 4 –To avoid the bleeds to become not too evident in your image, apply ruler setting. Go to “View” menu and select “Ruler”. Choose the horizontal ruler for your top and bottom borders. Then, use the vertical ruler to the left and right borders.
Step 5 – Drag and align the rulers before the bleeds to determine the actual size of the image to be printed. You can also expand the image to the edges to cover the bleeds.
Step 6 – Your image is now ready to print.
• When inserting bleeds, be acquainted with the different edges that are present on the page:
a. Live Area – outlines the edge of safety where the main atmosphere, scripts and graphics take place.
b. Cut Line – the edge where the trimming of the page happens.
c. Bleed Line – situated after the cut line that stops the page from bleeding off.
- You must identify the size of the image or document before you apply the bleeds. Normally, bleeds run off the edges of the document. Otherwise, you would not be able to put the bleeds properly.
- It can be tricky sometimes when setting bleeds because it depends on the printer standards. It is important that you should also recognize the cut size. Identifying the cut size lets you have the basis of the Bleeds and Live Area measurements. A safe presumption would be a half inch allowance. It could be easier for you to calculate how much space you can provide below the cut line and over the edge.
- You can also put distinguishing marks on the edges by setting it with colors for easy identification.
Foreseeable printing problems like this can be prevented with the benefit of adding bleeds. This process is quick and easy to follow that will certainly save you from making printing mistakes.